PALAZZANI RAGNO XTJ 32 / C, Operation And Maintenance Manual

Page: 109 / 210

Palazzani
Palazzani Industrie spa
OM 564 pag 3 Cap 5
5.3 RECOVERY OF THE PERSONNEL ON THE AERIAL CAGE
Machine working in order.
It is possible to recovery personnel on the aerial cage acting on the ground
controls: turn key (Fig. 3.2 pos. 1) on turntable symbol and operate by the remote
control; in this case you can working because all the safety devices work regularly
Anomaly to the electric plant
In case of motor and pump doesn’t run, it is impossible to act on ground control
panels, or there is an anomaly to the electric plant.
To lower the aerial cage on ground, act as follow:
•
Inside to the turntable, uncover in lead and unscrew the blue cap of the valve
marked with EV09 (fig. 5.1 part.1) and EV23 (Fig.5.2), push the cursor and
rotate in clockwise and lock in that position.
•
Open the cover of Fig. 5.3
Fig. 5.1 Fig. 5.2
•
Telescopic boom in.
By means the lever 1 of Fig. 5.4 activate the boom in
(see the label).
•
Lowering main boom.
Once the telescopic boom is total in, with the lever 2
of Fi. 5.4 activate the lowering boom (see the label) until the cage is on the
ground.
•
Attention!
During the lowering boom, the cage not levelling automatically
but it’s necessary to do this manually as follow: push the button of the valve
in the turntable marked with EV10(Fig. 5.1 part. 2) and at same time, the
person on the cage has to push the centre of the valve of Fig. 5.5 from one
side or other until the cage floor is horizontal. Execute alternatively the cage
levelling and boom lowering.
1
2