PALAZZANI RAGNO XTJ 32 / C, Operation And Maintenance Manual

Page: 127 / 210

Palazzani
Palazzani Industrie spa
OM 601 pag 10 Cap 6
6.6. SIX-MONTH MAINTENANCE
Besides the checks described previously, it is recommended to evaluate the
situations and the environment in which the machine has been operating, above all
if near the sea, in aggressive environments or if the equipment has been left outside
all the time and thus subject to the weather.
•
Check if the fluid in the hydraulic system has foam or is dark coloured
•
Check the conditions of the extension chain and its usury (see paragraph 6.12)
and grease it
•
Check the tracks conditions (even if some steel wires are uncovered or
damaged, the endurance of the machine is not committed)
•
Check the solderings are not rusty
•
Check the conditions of the protection paint and, if necessary, fix it, in order to
prevent rust formation.
•
Check the possible presence of paint blisters on the cylinders and on the arms
and make sure it is not because of any structural subsidence
•
Set the engine following the proper manual
•
check the usury of the chromium plated stems of the cylinders, especially if
near the sea
•
Once the machine is parked and the engine is not running, check the stabilizers
in search of any subsidence; subsidences are not accepted for these cylinders
and the replacement must be instantaneous
•
Check the signs on the command panels, the instruction plates and the
emergency signs and replace the ones damaged
•
refill the slewring reducer and the tracks engines
•
Clean the arm and stabilizers microswitches
•
grease the stabilizers articulation springs.
Inform the responsible personnel of any problem encountered.