Palazzani
Palazzani Industrie spa
OM 601 pag 7 Cap 6
Display
Refill
•
Check the output voltage from the generator on
board. While the thermal engine is running,
activate the generator using the selector on the
control panel in the cage. Open the main
command panel (fig 3.2) and measure the
voltage between the binding clamps G1 and G2
(fig 6.5). The voltage must be 200V ±10%. If
the voltage is higher or lower, set the number of
rounds of the thermal engine
Fig. 6.5
•
Using a dynamometrical wrench, check the bolts of the slewing (see the
following table)
SCREWING TORQUE TABLE (kgm)
Screw type
Screw diameter
ISO
DIN M 10 M 12 M 14 M 16 M 18 M 20 M 22 M 24 M 27 M 30
8,8 8G 4 7 12 18 26 33 44 57 80 105
10,9 10K 6 8,5 15 22 32 41 53 69 100 127
12,9 12K 8 10 18 26 38 49 63 82 115 150
•
Check the oil level in the reducer gear for the cage levelling by means of the
special display Fig. 6.6. When the display is in horizontal position, the oil level
has to be at the middle. If not refill by means of the dedicate cap (Fig. 6.6).
•
Check the play between the reducer and the slewing; set the equipment in work
position and execute the boom rotation manoeuvre. Check that when you leave
the command, the rotation stops and does not produce strange plays. If you
notice any play, it is necessary to set the reducer closer to the slewing. Check
the oil level from the visor as shown in fig 6.7; the oil must be visible, if not,
top up from the proper cap.
Fig.
6.6 Fig.
6.7
Display
Refill
Summary of Contents for RAGNO XTJ 32 / C
