Painless 60608, Installation Manual

Page: 9 / 52

8
Volt/Ohm Meter:
A Volt/Ohm meter is always a good tool to
have on hand when installing any type of
electrical components into any vehicle. Most
basic units provide the two functions required
to diagnose most electrical issues seen during
a harness install. These two functions are the
ability to read DC Voltage and electrical
continuity or Ohms. They can be purchased
from any home improvement store, local
hardware store and electrical supply shop and
online.
Battery Charger:
A battery charger is a very useful tool to have when initially connecting power up to a
newly installed wire harness. Battery chargers are available from any auto parts,
sporting, home improvement or local electrical supply store. Be sure the charger you
purchase has a low (5-10 Amps) setting.