Painless 60608, Installation Manual

Page: 2 / 52

1
Web Site: www.painlessperformance.com
E-Mail: painless@painlessperformance.com
If you have any questions concerning the installation of this harness or
having trouble in general, feel free to call Painless Performance Products'
tech line at 1-800-423-9696. Calls are answered from 8am to 5pm central
time, Monday thru Friday, except holidays.
We have attempted to provide you with as accurate instructions as
possible, and are always concerned about corrections or improvements
that can be made. If you have found any errors or omissions, or if you
simply have comments or suggestions concerning these instructions,
please write us at the address above. Or, better yet, send us a fax at (817)
244-4024 or e-mail us at
painless@painlessperformance.com . We
sincerely appreciate your business.
Perfect Performance Products, LLC shall in no event be liable in contract
or tort (including negligence) for special, indirect, incidental, or
consequential damages, such as but not limited to, loss of property
damage, or any other damages, costs or expenses which might be claimed
as the result of the use or failure of the goods sold hereby, except only the
cost of repair or replacement.
CAUTION
: BEFORE THE REMOVAL OF YOUR ORIGINAL HARNESS
AND/OR THE INSTALL OF YOUR NEW PAINLESS HARNESS,
DISCONNECT THE POWER FROM YOUR VEHICLE BY REMOVING
THE NEGATIVE AND POSITIVE BATTERY CABLES FROM THE
BATTERY. THE BATTERY IS NOT TO BE CONNECTED UNTILL THE
PAINLESS HARNESS HAS BEEN INSTALLED AND TESTED.

A full color copy of these instructions can be found at
http://www.painlessperformance.com/InfoSearch/manuals.php

Painless Performance Products recommends you, the installer,
read this installation manual from front to back before installing
this harness. Due to the variables involved with your particular
installation, reading this manual will give you considerable insight
on the proper installation of this harness.

In the event that there are unused or unconnected wires, the ends
of all unused wires will need to be terminated with an insulated
terminal or taped. Doing so will prevent the wires from shorting
and causing harness failure or fire.