23
activation wire. Use the appropriate terminal from the parts kit to connect this
wire to the A/C compressor clutch activation wire located on the A/C compressor.
If your compressor clutch requires an external ground connect the #992 to it.
The #922 wire is a constant battery ground wire;
if you don’t need it just tape it
back in the harness.
16. Route the light green wire (labeled
#921
) to the engine temperature gauge
sender. This wire protrudes from the same harness breakout as the #8 injector
connector. Terminate it with the appropriate terminal from the parts kit and
connect it to the sender.
17. Plug the black three pin mass air flow sensor connector (labeled
MAF
) into the
mass air flow sensor.
Summary of Contents for 60608
