User’s Manual
66
17.
Clicking the
OK
button saves the changes and returns to the
Setup
dialog box. Selecting
Cancel
exits the dialog
box without saving the changes.
18.
In the
Remote
tab, move to
Connect with the registered password
. If this box is checked, the remote DVR
will be connected automatically with registered user ID and password. If there is no registered password, the
login dialog box will appear. The connection fails when an incorrect password is entered.
19.
Move to
Reconnect when network went down
, and check the box if you want to reconnect the remote site
automatically when you are disconnected from the remote site for network problems.
20.
Move to
Auto connect when callback…
, and check the box if you want to connect the remote site automatically
when the BASE system receives a callback message. This auto callback connection can be disconnected
automatically if you check the
Disconnect after
box and set the desired disconnection time.
21.
Move to
Dialup Network
, and check the
Use modem
box when using a modem for remote access, and then
select a modem to use from the drop-down list.
22.
Click the
Set up group...
, and set up the group management. The BASE system can monitor up to 32 remote
DVRs simultaneously. For the effective management of the remote DVRs, the user can register multiple remote
DVRs in one group. Up to 64 groups can be registered.
23.
Move to
Group
, and set up the group information. Click the
Add
button to register a new group.
24.
Enter the name of the group to register, and click the
OK
button.
25.
Move to
Camera assignment
, and select the target remote site and camera number from the drop-down list.
26.
Clicking the
OK
button saves the changes and returns to the
Setup
dialog box. Selecting
Cancel
exits the dialog
box without saving the changes.
NOTE:
If you want to edit the established group information, click the
Edit
button after selecting a registered
group from the list. Then, edit the group information. If you want to delete a registered group, click the
Delete
button after selecting a registered group from the list.
27.
Click the
Set up network...
, and set up the network. See
Appendix 3 –
Network Setup (LAN)
or
Appendix 4
–
Network Setup (Modem)
.
28.
After you have changed the settings, you can save your changes by clicking the
OK
button. Selecting
Cancel
exits the dialog box without saving the changes.
