User’s Manual
24
15.
Move to
Camera association
, and click the camera icon to associate it with the camera selected step 1. If motion
is detected by one camera, other cameras can be associated with it so that video will also be recorded from the
associated cameras.
16.
Move to
Alarm association
, and click the alarm icon to associate it with a selected sensor. The alarm will go off
when a selected camera detects the motion.
Setting Up the Object Detection
1.
Click the
Camera
icon.
2.
Move to
Enable All
, and click the button to enable
Object Tracker
function for all cameras.
3.
Move to
Enable
, and check the box to enable
Object Tracker
function for the selected camera. If the Object
Tracker is selected, the DVR will detect the changes on the image compared to the reference image during the
preset dwell time.
4.
Move to
High priority
, and check the box to give high priority to the target camera. The DVR will follow the
advanced camera setup when the object tracker detects changes on the image of the selected camera. See the
Setting Up Cameras
for configuring advanced camera setup.
5.
Move to
Record Audio
, and check the box to record audio when a selected camera detects changes on the image.
Recording audio will be activated when the DVR is recording video. When checking the
Record Audio
box,
click the
Set up Audio...
button. Select an audio input type from
Microphone
or
Line-in
, and set its balance and
volume in the
Recording Control
dialog box. (Not available for the PDR16-RMT-RT model)
NOTE:
The sound card provides two types of audio input, Microphone and Line-in. Microphone is for an
unamplified source while Line-in is for an amplified source. You must manually select the recording input type.