PACOM PDR16-RMT Series User Manual Download

Page: 43 / 130

Digital Video Recorder

Playback Window

Displays the current playback image.

Displays who logs in the system.

Clock

Displays the date and time of the current playback image.

Utility Buttons

Data Loading – Local

: Click the button to load recorded data from the local hard disk drive.

Data Loading – Remote

: Click the button to load recorded data from the remote DVR via LAN. The

following

Remote Site

dialog box appears, and the remote site(s) you registered for remote monitoring

is (are) displayed in the list box.

- Connecting a remote site…

Click the site where you want to connect in the list box, and then click the

Con.

button.

Double click the site where you want to connect in the list box.
Or, hit the enter key after entering the site address in the text field located under

Select a site

. (Quick Search)

- Disconnecting a remote site…

Click the site where you want to disconnect in the list box, and then click the

Discon.

button.

NOTE:

If you want to arrange the site list in the descending orders, click the

Address

headings on the list box.

NOTE:

The DVR can only view recorded, not live video on another DVR.

Data Loading – Backup

: Click the button to load backup data from the extra backup device (e.g.

DVD-RAM, CD-R(W), USB hard disk drive).

Summary of Contents for PDR16-RMT Series



































































































































Search results

Summary of Contents for PDR16-RMT Series

Reviews:

Related manuals for PDR16-RMT Series

Brands by name

Popular brands

PACOM PDR16-RMT Series, User Manual

Search results

Summary of Contents for PDR16-RMT Series

Reviews:

Related manuals for PDR16-RMT Series

Brands by name

Popular brands