User’s Manual
28
Setting Up the Alarm
1.
Click the
Alarm
icon.
NOTE:
Selecting
1-16
tab displays alarm channels to 16 and selecting
17-32
tab displays 17 to 32.
2.
Move to
Enable
, and check the box to enable the selected alarm. When selecting
Use alert sound on event
, the
DVR will play alert sound through the attached speaker during alarm output.
3.
Move to
From
and
To
, and set the beginning and ending time (00:00 to 24:00) of alarm activation by holding
down and dragging the pointer.
NOTE:
In cases where the
From
hour is later than the
To
hour, the alarm will be activated at the
From
time of the
current date until next day's
To
time. If you set
To: 08:00
and
From: 18:00,
this means the alarm will be active
over night from 6:00 p.m. until 8:00 a.m. the following day.
4.
Move to
Dwell time
, and set the alarm output duration (0 seconds to 30 minutes) by holding down and dragging
the pointer.
NOTE:
16-channel alarm outputs are provided for the PDR16-RMT-LIVE series and PDR16-RMT-RT models,
and 32-channel alarm outputs are provided for the PDR32-RMT-X model..
