User’s Manual
64
4.
Move to
Show VLoss Dialog
, and check the box if you want to show the video loss acknowledge dialog when
the video loss is detected.
5.
Click the
Event log
button to display the event log list of the BASE system.
6.
Move to
Show OSD
, and check the box if you want to show OSD information including camera title, recording
mode, recording status and event detection results on the image. Move to
Motion Detection/Object Detection
,
and check the event box if you want to show detection results when the selected event occurs.
7.
Move to
Verify password
, and check the boxes to use a password
Before shutdown
,
Before stop
recording
,
Before setup
, and/or
Before search
.
8.
Move to
Use alert sound on event
, and check the box if you want the system to alert for the selected events
when events occur.
9.
Click the
Change password…
box
to change the password. The default password is
111
.
NOTE:
Refer to the
SmartGuard
section for setting up other menus.
10.
Move to
Remote
tab.
11.
Click the
Add
button, and register the remote site. Up to 256 sites can be registered.
