Packard Bell EasyNote LS11HR, Service Manual

Page: 108 / 218

3-32 Machine Maintenance Procedures
10. Remove mainboard from lower cover (Figure 3-28).
Figure 3-28. Mainboard
Mainboard Installation
0
NOTE:
NOTE
:
Connectors on left side of mainboard (i.e. USB 2.0, HDMI, etc.) are set in lower cover
slots. Do not force mainboard at installation.
1.
Install board by sliding connectors at left side of board at a slight angle into slots on left side of lower
cover (Figure 3-28).
2. Lower right side of board until edge is flush with lower cover.
3. Install and secure screw (G) to lower cover ( Figure 3-27 ) .
4. Connect Bluetooth cable to mainboard connector (A) ( Figure 3-27 ) .
5. Connect speaker cable to mainboard connector (B) ( Figure 3-27 ) .
6. Connect USB FFC cable to mainboard connector (C). Refer to USB Module Removal
7. Connect LAN to mainboard connector (D) ( Figure 3-27 ) .
8. Connect microphone cable to mainboard connector (E) ( Figure 3-27 ) .
9. Connect LVDS cable to mainboard connector (F) ( Figure 3-27 ).
10. Connect DC-IN cable to mainboard connector (H) ( Figure 3-27 ) .
11. Install upper cover/keyboard.
ID Size Quantity Screw Type
G M2.5*3 Ni 1