manualshive.com logo in svg

Packard Bell DOTMA-111G16i, Service Manual

The Packard Bell DOTMA-111G16i Service Manual is a comprehensive user guide for this high-performance laptop. Available for free download at manualshive.com, this manual provides detailed instructions and troubleshooting tips to ensure optimal performance and utilization. Experience hassle-free access to this essential resource for your Packard Bell DOTMA-111G16i.

Share
Download
background image

Chapter 2

31

Remove HDD/BIOS Password Utilities

This section provides you with details about removing HDD/BIOS password methods:

Removing HDD Password:

If you key in the wrong HDD password three times, an error code is generated.

To reset the HDD password, perform the following steps:

1.

On a different machine, run the 

HDD_PW.EXE

 file along with the error code generated. For example:

hdd_pw 15494 0

2.

Select an option to generate upper case or lower case ASCII code for unlocking the HDD. 

3.

Two strings are generated as output. Select and note down either one of the strings.

4.

Reboot the machine with the locked HDD and then use either one of the strings as the HDD user 
password.

Downloaded from LpManual.com Manuals

Summary of Contents for DOTMA-111G16i

















































































































































































Reviews:

No comments

Related manuals for DOTMA-111G16i

Brands by name

Popular brands

Load more brands