Media Tray Cover Plates Installation
TheMedia Tray Cover Plates are shipped with the fireplace. The kit consists of 4 flat steel panels, two
short and two long panels. They are to cover the perforated mesh surrounding the burner. If an Optional
Light Kit is installed, do not use the panels to cover the perforated mesh as they will block any light
coming up through the Glass Media.
1.
Place the short panel with the notch for the pilot on the left side of the burner.
2.
Place the other short panel on the opposite end of the burner.
3.
Place one of the long panels across the back behind the burner.
4.
Place the last panel in front of the burner.
Note: Correctly placed, all 4 panels should be flush with each other and butted up tight to
each other.
Figure 55: Burner Panel Installation
44
100004937
Esprit L44
290421-60
