Figure 49: Electrical Junction Box.
Route an appropriately sized
electrical wire through the wire
strain relief on the left side of the
fireplace, near the bottom edge.
See Figure 48
Extend the wire all the way to the
electrical box located inside the
fireplace below the firebox. Make
the connection inside the electrical
junction box.
Note: In some homes, the spark ignition of the fireplace may cause intermittent, non-damaging,
TV signal interference during the fireplace lighting sequence if the TV is plugged into the
same electrical circuit. It is recommended that the fireplace and TV use different circuits to
mitigate the interference potential. If interference is occurring on the same circuit, the use of
surge protectors may help alleviate the interference.
39
290421-60
100004937
Esprit L44
