9
E
PR
O3
5 Image C
on
ver
te
r
1
Support systems for use with the PRO35 Image Converter
There are four possible solutions, explained in the following:
1.
15 mm light weight support (by default delivered with the PRO35)
– for use with normal (prime) lenses
– for attachment of 15 mm light weight accessories
2.
15 mm light weigth support (ARRI based)
3.
19 mm heavy duty support – Chrosziel based
– for use with heavy lenses (i. e. zoom lenses)
– for attachment of 19 mm movie accessories
4.
19 mm heavy duty support – ARRI based
– for use with heavy lenses (i. e. zoom lenses)
– for attachment of 19 mm accessories
Support bridges to adapt from 19 mm ligth weigth support to 15 mm heavy duty support are
available as well:
Cables and general accessories
22612
PRO35 power supply cable for “Lens” connector
(Hirose 12-pin/ Fischer 7-pin, angled connector) (with twist protection MK II)
19142
PRO35 power supply cable Anton Bauer 2-pin (with twist protection MKII)
19143
PRO35 power supply cable Digibeta Hirose 4-pin (with twist protection MKII)
19144
PRO35 power supply cable XLR 4-pin (with twist protection MKII)
19187
PRO35 power supply cable XLR 5-pin (with twist protection MKII)
19188
PRO35 power supply cable “open end” (with twist protection MKII)
20449
RS switch ON / OFF (to use with MINI35 and PRO35)
21067
RS switch holder complete (incl. RS switch holder, Cmotion fastener,
RS extension cable 0,8 m)
21065
RS extension cable, 0,8 m
19710
PRO35 support bridge for 19 mm to 15 mm rods
19715
PRO35 support bridge for 15 mm to 15 mm rods
