45
E
FA
Q
6
The PRO35 does not start ? What can I do?
Background: The PRO35 starts when the VTR signal goes to LOW Level on the lens
connector (tested on Digibeta, Beta SP and Panasonic). Some cameras do not go to
LOW Level when pushing the VTR button. We do not know whether this is a typical pro-
blem for a certain camera model or only for some single cameras.
Solution: Connect a remote switch (like “RS switch” (#20499) from P+S Technik) to the
PRO35 Image Converter (3-pin Fischer). Then you can start the camera (VTR) and the
PRO35 simultaneously. This is the method preferred by most DPs. Alternative switches
are available from ARRI (“RS-4”) and other suppliers.
Can I replace the target (ground glass) of the PRO35 if it is broken?
Yes, it is possible to replace the target. There are two possibilities:
1) You can send us the broken Image Converter and we replace the target for you.
2) You can order a new target and replace it on your own. In this case the warranty ex-
pires.
Is there any place other than Germany where I can buy this equipment?
We have several local dealers. You can download the actual listing from our website
45.
46.
47.
