17
E
Setup
2
2.3 Operating Elements of the Image
Converter:
2.3.1 Start / Stop:
* While the camera is recording, the RUN-Button
g
is not active
The Image Converter does NOT start automatically after changing battery
or switching on/off the camera (this is not a failure, but it saves electricity and incre-
ases the lifetime of the mechanical components of the unit).
Check BEFORE shooting, whether the Image Converter:
a) is already running (manual start) or
b) is started automatically with the camera
Manual “RUN” status
VTR signal
Result
OFF
VTR ON*
VTR OFF
Image Converter ON
Image Converter OFF
ON
VTR ON*
VTR OFF
Image Converter ON
Image Converter ON
Tip:
Start the shooting AND the Image Converter
SAVELY with an external start/stop switch (e. g.
with the P+S Technik RS switch #20449 or other
compatible switches). Hence you can almost
screen out that the Image Converter is not running
during recording.
The utilization of the RS switch makes a simultane-
ous starting of PRO35 and camera possible.
If the Image Converter has been started manually
(RUN-Button
g
) a pressure on the VTR-start button
of the camera activates ONLY the recording; the
Image Converter remains in RUN-Mode.
