![background image](http://html1.mh-extra.com/html/ozito/cdl-5010/cdl-5010_instruction-manual_1666257026.webp)
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. BATTERY
1 Base Plate Locking Knob
2 Base Plate
3 On/off Trigger
4 Blade
5 Lock-off Button
6 Blade Flange
7 Lower Guard Lever
8 Guide Fence Locking Knob
9 Spindle Lock (not shown)
10 Front Handle
CORDLESS TRIM SAW
11 Charging Adaptor
12 Charging Cradle
13 Hex Key
14 Guide Fence
ACCESSORIES
Installing and Removing
To insert, push the battery into
the base of the trim saw until it
clicks into place.
This charger is recommended for use with a residual current
device with a rated residual current of 30mA or less.
Charging
To remove, press & hold the
battery release button and pull
the battery out.
2. Insert battery into charger.
The red and green light will
illuminate when battery is
properly connected.
1. Plug charging jack into the
charger. The green light will
illuminate when properly
connected.
3. The red light will extinguish
when the battery is fully
charged.