![background image](http://html1.mh-extra.com/html/ozito/cdl-5010/cdl-5010_instruction-manual_1666257002.webp)
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. BATTERY
Note
: On the initial charge, the battery requires 5 hours of charging.
Subsequent charging only requires 3-5 hours. It will take 4-5 charging
cycles before the battery reaches optimum charge and run time.
1 Keyless chuck
2 Torque adjustment collar
3 LED Worklight
4 Variable speed trigger
5 Battery release button
6 18V Battery
7 Forward/reverse lever
CORDLESS DRILL DRIVER
Installing and Removing
2. Insert battery into charger.
The red and green lights will
illuminate when battery is
properly connected.
Slide the battery into the drill
base until it clicks into place.
1. Plug charging jack into the
charger. The green light will
illuminate when properly
connected.
Charging
Hold down the battery release
buttons and slide the battery out.
8 Drill bit x 4
9 Driver bit x 2
3. The red light will extinguish
when battery is fully
charged.
This charger is recommended for use with a residual current
device with a rated residual current of 30mA or less.
ACCESSORIES