manualshive.com logo in svg

Ozito CDL-5010, Instruction Manual

Share
Download
Ozito CDL-5010 Instruction Manual Download Page 58

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to 

the online manual.

KNOW YOUR PRODUCT

SETUP & PREPARATION

1.  BATTERY

1  Lock-off Button
2  Sure Grip Handle
3  18V Battery
4  Battery Release Button

5  On/off Trigger
6  Front Shoe
7  Tool-free Blade Clamp

CORDLESS CUT SAW

9  Charging Adaptor
11 Charging Cradle

12 Metal Cutting Blade
13 Wood Cutting Blade

ACCESSORIES

Installing and Removing

To insert, push the battery into 

the base of the cut saw until it 

clicks into place.

This charger is recommended for use with a residual current 

device with a rated residual current of 30mA or less.

Charging

To remove, press & hold the 

battery release button and pull 

the battery out.

2.   Insert battery into charger. 

The red and green light will 

illuminate when battery is 

properly connected.

1.   Plug charging jack into the 

charger. The green light will 

illuminate when properly 

connected.

3.   The red light will extinguish 

when the battery is fully 

charged.

Summary of Contents for CDL-5010

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands