6
7
8
FWD
REV
2. KEYLESS CHUCK
3. CONTROLS
1. To start drilling squeeze
the variable speed
trigger.
2. To stop drilling release
the trigger.
1. Hold the back sleeve of
the chuck with one hand.
4. Ensure the bit is firmly in
place.
3. Tighten the chuck jaws.
2. Insert the drill bit,
making sure it is
centred in the jaws.
OPERATION
Variable Speed Trigger
Forward/ Reverse Lever
Installing Drill Bit
1. For forward rotation, push the lever hard left. For reverse rotation
push lever to the right.
Adjusting Torque
Removing Drill Bit
1. Hold the back sleeve while
turning the front sleeve
clockwise to open chuck.
Caution:
Do not handle drill bits or other accessories without
gloves as they are sharp and can become hot after use, this can
cause personal injury.
Turn torque ring to the desired
setting. Refer to Helpful Tips for
determing desired setting.
2. With the other hand, turn
the first chuck sleeve anti-
clockwise.
2. Remove the drill bit.
