Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your local
council authority for recycling advice.
LED lights do not illuminate on charger
Check the charging adaptor is securely plugged into the wall out let.
Check the battery is firmly connected to the charging cradle.
Check that the charging jack is securely connected to the charging cradle.
Circular Saw Tips
Always hold the soft grip handle with one hand and the front handle with the other.
Maintain a firm grip and operate the on/off switch with a positive action.
Never force the saw. Use light and continuous pressure.
When cutting is interrupted, to resume cutting, depress the lock-off button and
squeeze the on/off switch and allow the blade to reach full speed, re-enter the cut
slowly and resume cutting.
When cutting across the grain, the fibres of the wood have a tendency to tear and
lift. Advancing the saw slowly minimizes this effect. For a finished cut, a cross cut
blade or mitre blade is recommended.
MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
1. When not in use, the saw should be stored in a dry, frost free
location, keep out of children’s reach.
2. Keep ventilation slots of the saw clean at all times and prevent
any from entering.
3. If the housing of the saw requires cleaning, do not use solvents
but cloth only.
4. Blow out the ventilation slots with compressed air periodically .
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repair of the saw by an unauthorised person or by
mishandling.
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
18V
Battery SPCDL018-37
Charging
Stand
SPCDL018-38
Charging
Adaptor
SPCDL018-39
BATTERY AND CHARGER SAFETY WARNINGS
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING
INSTRUCTIONS FOR YOUR BATTERY CHARGER.
1.
Before using the charger read all instructions and cautionary markings on
the charger, battery pack and the product using the battery pack.
2.
This charger is not intended for any uses other than charging rechargeable
batteries. Any other use may result in risk of fire, electric shock or
electrocution.
3.
Do not place any object on top of the charger or place the charger on a soft
surface that may result in excessive internal heat. Place the charger in a
position away from any heat source.
4.
To reduce risk of damage to the electric plug and cord, pull by the plug
rather than the cord when disconnecting the charger.
5.
Make sure the cord is located so that it will not be stepped on, tripped over,
or otherwise subjected to damage or stress.
6.
An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in the risk of fire, electric shock or
electrocution.
7.
Do not operate the charger if it has received a sharp blow, been dropped or
otherwise damaged in any way. Have it checked by an electrician or power
tool repairer.
8.
Do not disassemble charger. Take it to an electrician or power tool repairer
when service or repair is required. Incorrect reassembly may result in a risk
of electric shock, electrocution or fire.
9.
To reduce risk of electric shock, unplug the charger from the outlet before
attempting any cleaning. Removing the battery pack will not reduce this risk.
10. Never attempt to connect 2 chargers together.
11. DO NOT store or use the tool and battery pack in locations where the
temperature may reach or exceed 40ºC (such as inside sheds or metal
buildings in summer).
12. The charger is designed to operate on standard household electrical power
(240 volts). Do not attempt to use it on any other voltage!
13. The battery pack is not fully charged out of the carton. First read the safety
instructions and then follow the charging notes and procedures.
14. The longest life and best performance can be obtained if the battery pack
is charged when the air temperature is between 18 - 24ºC. Do not charge
the battery pack in an air temperature below 10ºC or above 40ºC. This is
important and will prevent damage to the battery pack.
15. Do not incinerate the battery pack even if it is seriously damaged or is
completely worn out. The battery can explode in a fire.
16. Never attempt to open the battery pack for any reason. If the plastic housing
of the battery pack breaks or cracks, immediately discontinue use and do not
recharge.
17. During charging, the battery must be placed in a well ventilated area.
Warning
Read instruction manual
mA
Milliamperes
Recycle battery
Do not put in the rubbish
Polarity
Do not incinerate
Do not get battery wet
Thermal cut-out protection
Transformer Energy
Rating (MEPS)
Double insulated
/min
Revolutions or
reciprocation per minute
Ah
Amp hour
ø
Diameter
Indoor use only
Lithium Ion battery
Do not use or store battery in
temperatures exceeding 50ºC
Electrical Emissions
Conformity (EMC)
n
o
No load speed
V
Volts
Hz
Hertz
ac/~
Alternating current
W
Watts
Direct current
dc
