2. SETTING UP THE CUT
3. ON/OFF SWITCH
OPERATION
1. To turn on, depress
the lock-off button (a)
then squeeze the on/off
trigger (b).
2. To turn off, release
the on/off trigger.
WARNING:
AFTER USE, HOLD THE SAW AWAY
FROM YOUR BODY UNTIL THE BLADE STOPS
COMPLETELY. THIS MAY HELP TO PREVENT
SERIOUS INJURY.
a
b
1. Loosen base plate
locking knob.
2. Lower base plate to desired depth of cut.
3. Tighten base plate
locking knob to
secure depth of cut.
1. Insert guide fence through
the holes in base plate
2. Set desired width of cut
by aligning the scale with
notch in base plate.
3. Tighten guide fence
locking knob to
secure.
Adjusting Depth of Cut
Setting up Guide Fence
