background image

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk 

at your local Bunnings Warehouse. 
For further information, or any parts not listed here, visit 
www.ozito.com.au or contact Ozito Customer Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

Spray 

Gun 

   SPASG6000-127

Filter 

(inlet 

hose) 

   SPASG6000-031

High Pressure Hose 

 

 

SPASG6000-128

Filter 

(spray 

gun) 

   SPASG6000-12709

Spray 

Guard 

Assembly 

  SPASG6000-12741A

Spray 

Tip    SPASG6000-12738

Tip 

Guard 

Seal 

   SPASG6000-12737A

Bleeder 

Valve 

Assembly 

  SPASG6000-010A

Pressure Relief Valve Assembly 

 

SPASG6000-019A

Pump 

Column 

Assembly 

  SPASG6000-060A

Pressure Regulating Valve Assembly  

SPASG6000-071A

Note: There are a range of filters available to suit specific types of coating materials. 

To order a filter to suit your coating material please contact Ozito Customer Service.

Should an issue arise with your Airless Paint Sprayer or if you wish to make a claim 

under the 1 year Replacement Warranty, please call our Customer Service Helpline 

prior to returning your product.

 STORAGE

Once you have completed the cleaning procedure, it is important to protect 

the internal components of the pump before it is stored away. Failure to do 

so may result in premature wear and corrosion of the pump and various 

other components in your Airless Paint Sprayer. We recommend Wagner All 

Guard Pump Protector, available from Bunnings Warehouse.

Refer to the manufacturer’s instructions for use and follow accordingly.

Summary of Contents for ASG-6000














Reviews: