1 Turn trigger safety lock on.
Follow this procedure diligently as a build-up of dried paint on the
operating components can stop the unit from working.
3 Turn off pump and then put priming lever into prime position.
Spray Position
Prime Position
2 Adjust the pressure control dial
to cleaning setting.
4
Unlock the trigger and squeeze trigger to release any remaining
pressure in gun.
PRESSURE RELEASE PROCEDURE
CONTENTS
Know Your Product.................................................................. Page 2
Pressure Release Procedure.................................................. Page 3
Acrylic Vs Oil Based................................................................ Page 4
Cleaning the Unit .................................................................... Page 4
Cleaning the Inlet Hose............................................................Page 6
Cleaning the Spray Gun.......................................................... Page 6
Storage.................................................................................... Page 8
Spare Parts............................................................................. Page 8
1 Pressure Control Dial
2 Stand
3 Inlet Return Pipe
4 Paint Outlet
5 Filter
6 Inlet Hose
7 Priming Lever
8 On/Off Switch
9 Carry Handle
10 Nozzle Tip
11 Spray Gun
12 High Pressure Hose
13 Spray Gun Filter
14 Spanner x 2
15 Hex Key
16 Fine Needle x 3
17 Cleaning Brush
AIRLESS SPRAY GUN
KNOW YOUR PRODUCT
WARNING!
BEFORE BEGINNING THE CLEANING PROCESS, ENSURE THE
PRESSURE RELEASE PROCEDURE BELOW IS PERFORMED.
Back-up Pressure Release
If the priming lever fails to
reduce pressure in the system,
press the button located
underneath the paint outlet to
release the suction pressure.
