4.Advanced User Guidebook
95
to move line b.
6. In the bottom menu, select
Line Type
as
Vamp
to make the horizontal
cursors active. Select
Line
in the bottom menu as
a
or
b
, turn the
M
knob to move it.
7. In the bottom cursor menu, you can select
Window
as
Main
to make
the cursors shown in the main window.
How to Use Autoscale
This is a very useful function for first time users to carry out a simple and quick
test on the input signal. The function is applied to follow-up signals
automatically even if the signals change at any time. Autoscale enables the
instrument to set up trigger mode, voltage division and time scale automatically
according to the type, amplitude and frequency of the signals.
The menu is as follows:
Function
Menu
Setting
Instruction
Autoscale
ON
OFF
Turn on
Autoscale.
Turn off
Autoscale.
Mode
Follow-up and adjust both vertical and horizontal
settings.
Follow-up and only adjust horizontal scale.
Follow-up and only adjust vertical scale.
Wave
Show Multi-period waveforms.
Only show one or two periods.
To measure the signal using autoscale, you can do as the follows:
1. Push the
Autoscale
button, the function menu will appear.
2. In the bottom menu, select
ON
in the
Autoscale
menu item.
3. In the bottom menu, Select
Mode
. In the right menu, select
.
4. In the bottom menu, Select
Wave
. In the right menu, select
.
Then the wave is displayed in the screen, shown as
