NEO S-Series User Guide
10400666-001
© 2014 Overland Storage, Inc.
Page 30
4 Servicing
This chapter provides instructions for servicing the S-Series library.
Possible tools needed
4.1
To service a library you may need one or more of the following tools:
•
Flat-blade screwdrivers (large and small)
•
#2 and #3 Phillips screwdriver
•
Ground strap
Electrostatic discharge
4.2
CAUTION
Static sensitive
Risk of damage devices
A discharge of static electricity can damage static-sensitive
devices or micro circuitry.
Proper packaging and grounding techniques are necessary
precautions to prevent damage.
To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or
handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or
other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
•
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
•
Cover the library with approved static-dissipating material.
•
Provide a wrist strap connected to the work surface and properly grounded tools and equipment.
•
Place parts on a grounded surface before removing them from their containers.
•
Keep the work area free of non-conducting materials, such as ordinary plastic assembly aids and foam
packing.
•
Make sure you are always properly grounded when touching a static-sensitive component or assembly.
•
Avoid touching pins, leads, or circuitry.
•
Use conductive field service tools
•
If you do not have any of the suggested equipment for proper grounding, have an authorized reseller
install the part.
