Overland Storage LXLS10, User & Installation Manual

Page: 73 / 90

Troubleshooting
t
5-11
F
AULT
S
YMPTOM
C
ODES
(FSC)
3012 Slot Stow Failed
Enter to Reboot or
Power Down to Clear HARD fault - Stow to bin failed. C, D, G
3013 Drive Fetch Failed
Enter to Reboot or
Power Down to Clear HARD fault - Fetch from drive failed. C, D, G
3014 Drive Stow Failed
Enter to Reboot or
Power Down to Clear HARD fault - Stow to drive failed. C, D, G
3015 Drive Timeout
Enter to Reboot or
Power Down to Clear HARD fault - the drive has not complied with
an unload/eject command within 5 minutes. C, D, G
3020 Undefined Config
Enter to Reboot or
Power Down to Clear HARD fault - the motor process has detected
an illegal setting of the configuration
jumpers on the loader PWB. C, D, G
3021 No Cartridge
Enter to Reboot or
Power Down to Clear HARD fault - the "shuttle occupied" limit
switch indicated "no cartridge" when the
shuttle should be occupied. C, D, G
3040 Motor Firmware
Error
Enter to Reboot or
Power Down to Clear
HARD fault - F/W err: invalid state value
(unused). C, D, G
3100 Picker Jammed
Enter to Reboot or
Power Down to Clear HARD fault - Picker jam detected. The
picker was unable to reach the target
position after multiple retries. C, D, G
3200 Shuttle Jammed
Enter to Reboot or
Power Down to Clear HARD fault - Shuttle jam detected. The
shuttle was unable to reach the target
position after multiple retries. C, D, G
3300 Elevator Jammed
Enter to Reboot or
Power Down to Clear
HARD fault - Passthru Elevator jam
detected. C, D, G
4001 Rom CRC Error
Enter to Reboot or
Power Down to Clear HARD fault - The main code image failed the
power up CRC check and is unusable. C, D, G
4002 Ram Test Failed
Enter to Reboot or
Power Down to Clear HARD fault - The RAM did not read back the
same data that was written. C, D, G
4003 Xilinx Progr. Error
Enter to Reboot or
Power Down to Clear
HARD fault - The servo tach Xilinx did not
program properly (obsolete err). C, D, G
Table 5-2. Fault Symptom Codes