3-20
u
Operation
I
NSERTING
AND
R
EMOVING
C
ARTRIDGES
If you are still unable to open the magazine door, see
.
Figure 3-23. Magazine in Place
Removing the Magazine
Whenever the magazine door is closed it is locked in place to prevent tampering or accidental
removal. To remove the magazine, enter the Menu Mode by pressing the
Enter
button at the
Default Screen. At the Main Menu, select Unlock Door and press the
Enter
button. The
magazine door swings open.
Emergency Magazine Removal
If a fault occurs that prevents removal of the magazine, turn the power off for 30 seconds.
Power up while continuously pressing the
p
button. Continue to hold the button until all of the
indicators on the Control Panel light, then go out. The door will now swing open. Release the
button.
Inserting a Magazine into the Cartridge
If the magazine door on the front of the module is closed and locked, open it, as follows. Access
the Menu Mode by pressing the
Enter
button at the Default Screen. At the Main Menu, select
Unlock Door and press the
Enter
button. The magazine door swings open. Slide the magazine
through the door opening, with the cartridges protruding from the left. When the magazine is
fully inserted, push the door closed until it locks.
LXL-0027
Summary of Contents for LXLS10
