4
Safe-T-Beam® (STB) Non-Contact Reversing System
Places an invisible beam across door opening, that reverses
the door during down travel to the fully open position if
anything passes through beam.
Safe-T-Reverse® Contact Reversing System
Automatically stops and reverses a closing door within 2
seconds of contact with an object.
Automatic Lighting System
Two light bulbs up to 60 Watts max. each, are used for safer
entries and exits. The lights turn on when door is activated
and automatically turn off 4 minutes after stopping in each
end position.
Manual Emergency Release
Allows the garage door to be opened or closed manually
for emergencies or maintenance.
Speed Control
Self-adjusted.
Force Control
Self-adjusted.
1
READ AND FOLLOW ALL SAFETY, INSTALLATION AND
OPERATION INSTRUCTIONS. If you have any
questions or do not understand an instruction, call
your service representative.
2
Do Not install operator on an improperly balanced
door. An improperly balanced door could cause
severe injury. Repairs and adjustments to cables,
spring assembly, and other hardware must be made
by a trained service person using proper tools and
instructions.
3
Remove all ropes, and disable all locks connected to
the door before installing operator.
4
Install door operator 7 feet or more above the floor.
Mount the emergency release knob 6 feet above
the floor.
5
Do Not connect the operator to the source of power
until instructed to do so.
6
Locate the control button:
• Within sight of door.
• At a minimum height of 5 feet, so small children
cannot reach it.
• Away from all moving parts of the door.
7
Install the entrapment WARNING label next to the
wall button or console. Install the emergency release
tag on, or next to, the emergency release
8
The operator must reverse when the door contacts a
1-1/2 inch high object on the floor at the center of
the doorway.This is about the size of a 2" x 4" board
laid flat.
T
O REDUCE THE RISK OF SEVERE INJURY OR DEATH
:
WARNING:
Garage Doors are heavy objects that move with the help of springs
under high tension and electric motors.Since moving objects, springs
under tension, and electric motors can cause injuries, your safety and the
• Keep people clear of opening while door is moving.
• Do Not allow children to play with the door operator.
• Do Not operate a door that jams or one that has a broken spring.
MOVING DOOR
WARNING:
Can Cause Serious
Injury or Death
• Turn off power before removing operator cover.
• When replacing cover, make sure wires are not pinched or near
moving parts.
• Operator must be properly grounded.
ELECTRICAL SHOCK
• Do Not try to remove, repair or adjust springs or anything to
which door spring parts are fastened, such as, wood blocks,
steel brackets, cables or other like items.
• Repairs and adjustments must be made by a trained service
person using proper tools and instructions.
HIGH SPRING TENSION
safety of others depend on you reading the information in this manu-
al. If you have questions or do not understand the information
presented, call your nearest service representative.
WARNING:
Can Cause Serious
Injury or Death
WARNING:
Can Cause Serious
Injury or Death
In this section, and those that follow, the words
Danger
,
Warning
and
Caution
are used to emphasize important safety information.The word:
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided, may result in injury and property damage.
The word
NOTE
is used to indicate important steps to be followed or important information.
DANGER:
CAUTION:
WARNING:
IMPORTANT INSTALLATION
INSTRUCTIONS
Downloaded from
www.Manualslib.com
manuals search engine
