24
OUFLEX
We reserve the right to make changes to our products without a special notice.
IP20
0 ºC…+40 ºC
-20
ºC…+70
ºC
24
Vac,
50
Hz
(22
Vac
-
33
Vac)
(15 Vdc output = 0 A) 13 VA
(15 Vdc output = 750 mA) 34 VA
Notice! Please consider 24 Vac operating voltage and power required for Triac outputs.
12
Vdc
300 mA/3,6W (relays not in use), 400mA /4,8W (relays in use)
Measurement channel accuracy:
- NTC10 element: +0,1 ºC between -50 ºC…+100 ºC, 0,25 ºC b100 ºC…+130 ºC
- Ni1000 element: +1,0 ºC between -50 ºC…+130 ºC
- PT1000 element: +1,0 ºC between -50 ºC…+130 ºC
Also sensor tolerances and the effect of cables must be considered when
calculating total accuracy.
0…10 V voltage message, meas. accuracy 1 mV
Milliampere signal with shunt resistor 0/4-20 mA
Contact voltage 5 Vdc
Contact current 0,5 mA
Contact resistance max 1,9 kΩ (closed), min 11 kΩ (open)
Minimum
pulse
length
30
ms
Contact
voltage
15
Vdc
Contact current 1,5 mA
Contact resistance max 500 Ω (closed), min 1,6 kΩ (open)
Minimum pulse length 30 ms
Output
voltage
range
0…10
V
Output current max 10 mA/output
2
pcs
230
V,
6
A
4
pcs
230
V,
6
A
Output
current
together
max
1
A
Output
current
together
max
1
A
Output current max 1 A /output
Output current max 750 mA
Galvanically isolated, supported protocols Modbus-RTU
Galvanically isolated, supported protocols Modbus-RTU
RS-232-modem (GSMMOD6)
Full-duplex 10/100 Mbit/s, supported protocols Modbus-TCP/IP
32
I/O
points:
- 16 pcs universal
measurement
inputs
- 6 pcs 0-10
V
universal
outputs
- 6 pcs relay outputs (2 with change-over contact, 4 with normally open contact)
-
4
pcs
24
Vac
Triac
outputs
Operating
voltage
outputs:
- 5 pcs 24Vac outputs and a 15 Vdc output
21 I/O points:
- 9 pcs universal measurement inputs
- 2 pcs 0-10 V universal outputs
- 6 pcs relay outputs (2 with change-over contact, 4 with normally open contact)
- 4 pcs 24 Vac Triac outputs
16 universal measurement inputs
Operating voltage outputs:
- 5 pcs 24Vac outputs and a 15 Vdc output
Interface card for modem and local I/O extension
- unisolated RS-485 bus, supported protocols Modbus-RTU
- USB host connection for GSMMOD6 modem
- 15 Vdc voltage output, max 750 mA (total capacity together with the Ouflex device
15 Vdc voltage output (strip connector 93)
X
M
11
0
2
_O
ufl
ex
_U
se
r m
an
ua
l_
E
N
G
_v
.2
.3
.3
_2
0
17
0
3
27
Freely programmable automation system
Saving energy, creating comfort
Technical information
Protection class
Operating temperature
Storing temperature
Power supply
Operating voltage
Power required
Backup input
Current consumption
Universal measurement input (can be configured) measurement types:
Passive sensors (inputs 1…16)
Active sensors (inputs 1…16)
Contact information (inputs 1…16)
Counter inputs (inputs 13…16)
Digital input measurement types:
Contact information (inputs 21 and 22)
Counter inputs (inputs 21…22)
Analog outputs (61...66)
Relay outputs
Change-over contact relay (71…76)
Normally open contact relay(77…84)
Triac outputs
24 Vac (42 and 43)
24 Vac (44 and 45)
Operating voltage outputs
5 pcs 24 Vac outputs (41)
15 Vdc output
Data transfer connections
RS-485 bus (A1 and B1)
RS-485 bus (A2 and B2)
USB host connection
USB device connection
Ethernet
Extension units
FLEX COMBI 32
FLEX COMBI 21
FLEX UI-16
FLEX-EXU
