21
Press the small black SIM card release button with, for example, a pen tip. Part of
the SIM card slot will stick out of the modem. Pull the slot out of the modem. Do not pull
the slot out of the modem without pressing the SIM card release button first!
Insert SIM card into the slot and make sure it settles properly. Push the slot back to
its place. Set the SIM card PIN code as Ouflex device PIN code. Make sure PIN inquiry
is in use in the SIM card.
Inserting the SIM card
SIM card slot
SIM card release button
Antenna
mounting
point
Ouman GSM modem (GSMMOD6) can be connected to the straight
to controller. The modem has a fixed antenna that can be changed to
an external antenna with a 2,5m
cord
(optional equipment) if needed.
The modem’s indicator light shows what mode it is in.
Modem is not on. Connect network device to modem.
Modem is on, but it is not ready for use. Make sure that Ouflex
and GSM modem SIM card have the same PIN code, if PIN inqui-
ry is in use.
Modem is ready for use.
Modem is either sending or receiving a message. If you do not
receive an SMS from Ouflex, check the SMS you sent to see if
device ID and keyword were spelt correctly. Device ID is case
sensitive. Ouflexan identify the operator in use from the modem’s
SIM card. Identification does not occur until PIN code has been
entered. If Ouflex does not identify the operator even though
PIN is correct, enter message center number. You can find mes-
sage centre number, PIN code and device ID in ”System settings”
> ”SMS settings” in your Ouflex device.
LED is not lit:
LED is lit:
LED is blinking slowly:
LED is blinking rapidly:
LED indicator light
Modem mode/instructions
1. Connect the modem USB-connector to
the device USB host connector.
2. Connect the modem power supply to
the device conectors 93 (+) and earth
or use own transformet to modem.
ESC
93
1
2
