20
You can send the text message question mark to the controller to get a list of
key words. If the controller has a device ID in use, always write the device ID
in front of the key word (example. Ou01 KEY WORDS or Ou01 ?).
Capital and
small letters are different characters in the device ID!
The controller sends a list of key words as a text message that gives you
information about the controllers’ function. The key word is separated by a /.
You can write the key word using capital or small letters. Write only one key
word/message. Store the key words into your phone’s memory.
Send the following text message to the controller: KEY WORDS.
If a GSM modem is connected to the Ouflex you can communicate with the
regulator by text message using key words.
8 Communication via a mobile phone
The reply message will show all active alarms.
The reply message will show information about the latest alarms.
Informative messages
Change of the setting value by text message
Change of the selection by text message
Informative messages can not be edited or sent back to the Ouflex’s. In-
formative messages are, for example. measurements, different types of
information displayed, or the alarm queries
Key words:
Active alarms
Alarm history
KEY WORDS
ACTIVE ALARMS
ALARM HISTORY
Send a message with the correct key word.
The controller sends the settings to your mobile phone. Editing the setting values:
write the new setting in place of the old setting and send a message
back to the controller. The controller sends the setting as a return message.
Send a message with the correct key word.
The controller sends a return message in which a * appears in front of the control
mode in use. If you want to change the control mode, move the *
in front of the desired control mode and send the message back to the controller.
The controller
will then send a return message showing that it has switched to the desired control
mode.
