53
EH-105
INSTALLATION AND MAINTENANCE GUIDE
EH-105
(standard factory delivery)
EH-105 is fastened to its mounting base with three screws (two
mounting points under the cover in the connection space and
one in the installation bracket.
Cables can be brought for the controller from above (standard
factory delivery) or from below. In addition, there are 6 cable
through-holes in the bottom of the controller case which can be
opened, e.g., with a screw driver. Then the cables can be
brought into the connection space through the bottom.
(turn the keyboard/display unit)
The cables can be routed between the
controller and installation base when
spacers are used to mount the
controller.
Remove the clear cover. Press
as illustrated in the picture and
pull the cover out of place.
Detach the keyboard/display unit
carefully by prying it with a
screwdriver.
Turn the keyboard/display unit
into the opposite position.
Press the keyboard/display unit
carefully into place.
Complete installation by pressing the
plastic plugs into the screw holes.
Switch off the voltage from the controller.
Press the fuse socket and turn it
counterclockwise.
Change the 0,2 A
(5x20mm) glass tube fuse. Press and turn
the fuse socket clockwise into place.
Changing the fuse:
Changing the cabling direction:
Spacers:
Plugs:
Mounting guide:
Screw the controller to the wall using the installation bracket. Position
the unit so it is level. Screw the controller firmly into place using two
screws through the connection space.
Installation bracket
If you want to bring the cables to the controller from below, you must
turn the keyboard/display unit according to the following instructions.
Cabling from above:
Cabling from below:
