EH-105
da.mo state time
28.04
Sd
00:00
01.05
Su
00:00
Browse/ location for additional programming:
Move the cursor to ”Week program”. Press
. Press the
button to browse the
clock programs which have been made. If you want to make additional programs, move
cursor to the first empty program block.
Press
The starting time blinks. Press
the or
button to set the hours, minutes, and then the speed of the AH unit. Press
to confirm each setting in turn. The different outputs are: ½ output (minimum), 1/1
output (maximum), or 0 (AH unit is shut down).
Press the
button to select the weekday. The day is left unselected/ press the button to delete the
selection. Press
to take into use the selection shown on the display. Make your
selection for each day and press
Delete the program block by deleting the output
(-) or weekday (-).
-
The example shows the AH unit running at ½ output Mo.- Fri. from 06:00 - 18:00.
OK
Select AH unit starting time and speed:
OK.
-
+
OK
Set the weekdays for the above mentioned starting time and output:
+
OK
OK
.
15
Week program
SD program
06:00 AHU 1/2
MoTuWeThFr _ _
18:00 AHU 0
MoTuWeThFr _ _
Special day prog
AHU
AHU
00:00 AHU -
06:00
1/2
17:00
0
CLOCK FUNCTIONS
Information about clock program:
Text on the display:
01.07
0
00:00
31.07 AUT
18:00
KEYWORD
TEXT MESSAGE SENT BY
THE CONTROLLER
WEEK PROGRAM (#1):
MO-FR 07:00 MIN /
MO-FR 09:00 ON /
MO-FR 16:00 MIN /
MO-FR 17:00 OFF /
SA 09:00 MIN...continue...
WEEK PROGRAM (#2):
SA 10:00 ON/
SA 13:00 OFF
Week program
SD PROGRAM (#1):
06:00 MIN /
17:00 OFF /
Sd program
SPECIAL CALENDAR (#1):
28.04 SD/
01.05 SU/
01.07 06:00 0FF /
31.07 18:00 AUTO /
Special calendar
SpecialCalendar
Example. Making
a summer
holiday program
Reply message #1
Reply message #2
There is a max. of 5
connecting moments
in one reply message.
When a week day is changed, the AH unit runs at the normal starting situation output of
the changed day. E.g., If Saturday is changed to Wednesday, the day changes as it does
from fri-sa. Attention! The Sd program always begins at 0 output if not otherwise
indicated.
You can make your own separate special day ”sd”clock program. This special day is
taken into use at ”SpecialCalendar”. Move the cursor to ”Spec.day progr.”
and press
. The time blinks. Set the hours, minutes and then the speed of the AH
unit. Press
to confirm each setting in turn. You can program 5 program blocks for a
special day. Delete the program block by deleting the output (-).
: The special calendar can be used for special situations when a different
day program is needed for a certain day. A date is set for the special day. After that, a
day's program is chosen for the special day. Any day of the week or special day (Sd)
program can be selected. The controller indicates that the special day program begins
at the beginning of a 24 hour period at 00:00. The starting time cannot be changed. At
the end of the 24 hour period, the program which was operating before the special day
will be in effect, or if a new command was given during the special day then that
command will be in effect.
”Day change”
OK
OK
Other variations of the year program:
First give the date (day. month)
and then the AH unit control mode. Options are 1/1 output (AC freq. converter control at
maximum output), ½ output (AC freq. converter control at minimum output), 0 (AH unit
shut down) and auto (exit from special program and go to week clock mode). Here it is
easy to e.g., shut down the AH unit during a summer holiday.
. Remember to
program a return time to the automatic mode (auto).
Attention
