Ouman EH-105 has an LON-100 adapter card (optional equipment) which makes
it possible to connect the controller to an LON field bus, and an EH-485 and a
MODBUS-100 adapter card which changes the EH-105 controller's series traffic
bus to be compatible with the RS-485 field bus. In this special maintenance mode
you can select which measurement information is read via the bus.
Setting the bit number:
OK
-
+
OK
Press
. Press the
or
button
to set the bit number and
press
to confirm.
Move the cursor to the measurement you want and press
.
If you want to select a series traffic bus for the measurement in question, move the
cursor to ”Bus” and press
.
The
character indicates that the measurement information is read from the bus.
OK
OK
No bus
Bus
Setting bus measurements:
Bus measurements
Outdoor t.meas
Room t. meas.
CO2 meas.
Main pump run
Water press
Emergency Stop
EH-105
Main pump run
No bus
Bus
Water press
No bus
Bus
Emergency stop
No bus
Bus
Main pump run
Bit number 0
Not inverted
Inverted
AH start after
alarm is deactiv
No acknowledg.
After acknowl.
Select
Mainten.mode
Special mainten
Bus measurement
BUS MEASUREMENT/ LON INITIALIZATION
Instr.
p.23
48
