Otto Bock ECO BUGGY, Instructions For Use Manual

Page: 58 / 376

45 46
Attaching the padding (HR32070020-343)
The back support pad and the seat pad are connected to each other with snap fasteners.
1) Set the seat pad onto the seat upholstery and lean the back support pad against the back support upholstery
(not illustrated).
2) Push the tongue on the rear end of the seat pad back between the seat and back support upholstery, and
attach it below the seat pad with the hook-and-loop fastener (see fig. 47).
3) Set the side pads of the seat pad on the right and left upright and fasten them to the frame tube with the hook-
and-loop closure (see fig. 48).
4) Apply the side pads of the back support pad to the side pads of the seat pad and press the hook-and-loop
fasteners together (see fig. 49).
47 48
49
58
Use
Eco Buggy