Otto Bock ECO BUGGY, Instructions For Use Manual

Page: 53 / 376

25 26
27 28
Attaching the five-point belt in the area of the seat
1) Thread the centre fixation tongue through the suitable slit in the seat surface from above (see fig. 31).
2) Put the attachment buckle through the tongue and fasten it underneath the seat surface (see fig. 32).
→ This completes the installation of the five-point belt (see fig. 33).
Adjusting the belt
1) For subsequent length adjustment, use the four adjustment buckles of the lap belt section and the shoulder
belts (see fig. 29).
2) For optimum height adjustment of the shoulder belts, use the slots in the back support upholstery (see fig. 27,
item 3). Release the shoulder belt attachment. To adjust the height, thread the belt ends around through two
slots in the back support pad that are above each other and fasten the belt attachment again (see fig. 30).
3) To adjust the centre fixation, open and remove the attachment buckle under the seat surface. Thread the centre
fixation through the suitable slot and fasten the attachment buckle under the seat surface again (see fig. 31, see
fig. 32).
→
The five-point belt is adjusted correctly when the closed belt buckle lies against the child's abdomen.
29 30
53 Eco Buggy
Use