12
ENGLISH
Using the Push Rings for Operation
WARNING
Incorrect use of the E-Support may lead to injury or damage to the wheelchair, depending on the condition of the
road surface or traffic. First, read “Guidelines for Safe Use” to assure full understanding.
1. Before Use
(1) Check the remaining battery capacity, pressing the display switch to
confirm the capacity on the display lamps. When the display switch is
pressed, the lamps light for several seconds.
Note:
• The remaining battery capacity is displayed in a 5-step display (when
new).
• As the deterioration of the battery advances, some of the display lamps no
longer light, even though the charging has been completed (refer to
page 26).The travel distance also decreases.
(2) Check to see if the anti-tipper has been properly installed. (Refer to
page 19, Inspection and Adjustments.)
WARNING
Traveling without anti-tippers, or with the anti-tip bars shorter than the
“standard length” may cause a rollover. Never travel without making
adjustments.
(3) Get in the wheelchair.
WARNING
There is a danger of the wheelchair moving unexpectedly, causing a
rollover or a fall if you get in and out of the wheelchair incorrectly. Be
sure to get in and out of the wheelchair using the proper procedure
(page 10).
(4) Make sure that the power switch is turned off, and install the battery.
Insert the battery until it makes a “clicking” sound.
WARNING
Do not drop or jolt the battery. This can cause malfunction.
Caution:
· Do not put your hands or other objects in the battery insert inlet.
· Check that there are no foreign objects in the battery insert inlet. Remove
any objects before installing the battery.
· Do not deform or damage the contacting point.
(5) Sit tightly so you will not fall off the wheelchair.
Caution:
Do not forget to wear a seat belt if you usually use it.
Lock both wheels
Manual operation
“off”
blinks from to
on
off
