31
ENGLISH
2.1 Side Panel with Height Adjustable Armrest
To obtain a sufficient distance between side panel and rear wheel, mount the
adapter plate to the outside of the wheelchair.
It is necessary to check and possibly readjust the position of the fitting in the
adapter plate. The height of the fitting in relation to the adapter plate is
15 mm.The Nordlock washers are mounted to the inside.
With this version, on each rear wheel of the "E-Support" two spacers are
screwed one after the other into the threaded bore shown in figure 3.
Mounting Instructions for the Adaptation of the
"E-Support" to the Avantgarde SL, V, TR, or D
492E24=00000 E-Support (low amplification)
492E24=10000 E-Support (high amplification)
1. Description
The adaptation has been designed to allow assembly of the servo-assisted
"E-Support" to the Avantgarde SL, V, TR or D wheelchairs for active use.
In dependency of the side panels used with the wheelchair, there are two versions
for mounting the adapter to the wheelchair.
2. Mounting Versions:
1
2
3
15 mm
Thread for
spacer
