21
ENGLISH
2. Install the Battery in the Charger
Names of parts of the charger
1 Power supply cord
2 Charging lamp (green)
3 Refresh lamp (yellow)
4 Refresh switch
5 Battery insert inlet
6 Contact points
WARNING
Use only the specified battery charger. Failing to do so may cause fire or
damage to the unit.
1 Hold the plug and plug in the power cord to the charger and to a 100V
household outlet.
2 Make sure that the power switch of the charger is turned off.
3 Before charging, allow the battery to cool naturally until it feels cool to the
touch. 5° to 40°C is the appropriate temperature range for charging.
Caution:
To protect the battery, a hot battery will not start charging until the battery is
cooled off to an appropriate temperature. The battery, immediately after
use on a hot summer day, is likely to be hot. Cool the battery to an
appropriate temperature before charging it.
4) Insert the battery firmly until it hits the battery insert inlet of the charger.
WARNING
Do not drop or jolt the battery. This may cause it to malfunction.
Caution:
• Do not put your hands or other objects in the battery insert inlet.
• Check that there are no foreign objects in the battery insert inlet. Remove
any objects before installing the battery.
• Do not deform or damage the connecting point of the charger.
