55
The product is equipped with a VAS seat (Variable
Adjust Seat).
This seat type allows the technician to vary the seat
depth, seat and back width and centre of gravity set
tings.
7.10.3 Contoured pads
The contoured pads provide the user with good lateral support.
56
The contoured pads are offered in the flat contoured
and deep contoured versions. The pads can also be
covered in either cloth or artificial leather.
An incontinence cover is available in addition.
Illustrated: Contoured pads in the version with cloth
cover, deep contoured.
7.10.3.1 Detaching/attaching the covers
Cloth/artificial leather cover
Before putting on the incontinence cover, the cloth and artificial leather covers have to be taken off the seat pad.
In addition, the cloth cover can be taken off the seat and back pads for general cleaning.
57
Taking off/putting on the cover
1) Pull the seat or back pad off the hook-and-loop
strap.
2) Open the zipper of the cover and remove the foam
pad.
3) Now the cover can be taken off.
4) To put on the cover, insert the foam pad into the
cover again with proper alignment.
5) Close the zipper and secure the seat or back pad
again on the hook-and-loop strap.
Incontinence cover
INFORMATION
Since the artificial leather cover is relatively tight, the incontinence cover is used with the cloth cover as a rule.
Nevertheless, you should take the artificial leather cover off from time to time and check whether liquid has gotten
into the foam pad through the seams. You should clean the foam pad if this is the case.
The incontinence cover is positioned under the seat cover. It protects the foam pad against wetness.
70
Use
490E75=1_C
Summary of Contents for 490E75 1 C Series
Page 1: ...Instructions for use user 3 490E75 1_C ...
Page 2: ...2 490E75 1_C ...
Page 126: ...490E75 1_C 126 ...
