Otto Bock 490E75 1 C Series, Instructions For Use Manual

Page: 103 / 128

** The belt can be used to position the passenger during transportation. Using the personal restraint system is nev­
ertheless required.
7.18.4 Prohibited use
WARNING
Improper use in vehicles for transporting persons with reduced mobility
Risk of serious injury when using the product as a seat
► Please note that certain optional components on the product exclude the use of the product in a vehicle for
transporting persons with reduced mobility.
►
If the prohibition symbol shown below appears on the nameplate, this means the following: In vehicles for
transporting persons with reduced mobility, only use the seats installed in the vehicle with the corresponding
personal restraint systems.
► Information on the current status of our measures is available from the qualified personnel.
If the adjacent symbol appears on the nameplate, this indicates the following:
The product may
not
be used as a seat in vehicles for transporting persons with reduced mobility.
7.19 Care
7.19.1 Safety instructions
CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
► Clean the product at regular intervals.
► Water must not come into direct contact with the electronics, motor or batteries under any circumstances dur­
ing cleaning. Never use a water jet or high-pressure cleaning apparatus to clean the product.
► To avoid contamination with germs, clean seat cushions and back support upholstery whenever they get
soiled.
►
Check the driving behaviour of the product after cleaning it.
INFORMATION
Piston rods do not require lubrication. They are maintenance-free.
7.19.2 Cleaning
Clean the product regularly depending on the degree of soiling and frequency of use,
at least 1x per month
:
• Clean the control panel, battery charger, armrest and trim components with a damp cloth and mild cleaning
solution.
• Use a dry brush to clean the seat and back upholstery as well as the seat cushion.
• For more information on cleaning seat cushions, see the care instructions on the product or the supplied
instructions for use.
• Use a damp plastic brush to clean the wheels and frame.
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Do not spray the product with a pressure washer.
7.19.3 Disinfection
1) Thoroughly clean the pads before disinfecting.
2) Wipe all parts of the product with a disinfectant.
Important information about disinfecting
• Only use colourless water-based disinfectants. Observe the instructions for use provided by the manufacturer.
• Prior to disinfection, clean the seat and back padding, control panel and armrests.
103 490E75=1_C
Use