Control device accessories
Model
TEN° LCD module
Nominal input voltage
24 V
Operating voltage range
16–33 V
Absolute maximum voltage
35 V
Weight
Display module: 120 g
Connection module: 200 g
Case material
Plastic
Protection rating
IPX4
IR frequency range
10–455 kHz
Sip and puff control port
Full puff pressure: approx. 69 mbar
Full sip pressure: approx. -83 mbar
Control device accessories
Model
R-Net actuator module for controlling up to 6 seat functions
Max. output current per motor
15 A
Allowable environmental conditions
Operating temperature
-15 °C to +40 °C (+5 °F to +104 °F)
Transport and storage temperature
-15 °C to +40 °C (+5 °F to +104 °F)
Relative humidity
45% to 85%; non-condensing
Corrosion protection
Corrosion protection
Cathodic dip coating / powder coating
12 Appendices
12.1 Threshold values for wheelchairs transportable by train
INFORMATION
►
The products in this series fully satisfy the minimum technical requirements of regulation (EU) No. 1300/2014
regarding train accessibility for people with disabilities. However, not all versions can comply with all
threshold values due to different settings.
►
With the help of the table that follows, you or the qualified personnel can take measurements and verify wheth
er the specific product in question meets the threshold values.
Feature
Threshold value (according to regulation (EU) No. 1300/2014)
Length
1200 mm (47.2"); plus 50 mm (2") for the feet
Width
700 mm (27.6"); plus 50 mm (2") on each side for the hands when
moving
Smallest wheels
approx. 3" or greater according to the regulation, the smallest wheel
must be able to accommodate a gap measuring 75 mm (3") horizont
ally and 50 mm (2") vertically
Height
max. 1375 mm (54.1"); including a 1.84 m (72.5") large male wheel
chair user (95th percentile)
Turning radius
1500 mm (59.1")
Maximum weight
300 kg (661 lbs); for wheelchair with occupant, including baggage
Maximum obstacle height that can be
overcome
50 mm (2")
Ground clearance
60 mm (2.4"); at an upward slope angle of 10°, ground clearance
must measure at least 60 mm (2.4") under the foot rest for going for
ward at the end of the slope
Maximum inclination angle on which the
wheelchair will remain stable
6° (dynamic stability in all directions)
9° (static stability in all directions, also when wheel lock engaged)
124
Appendices
490E75=1_C
Summary of Contents for 490E75 1 C Series
Page 1: ...Instructions for use user 3 490E75 1_C ...
Page 2: ...2 490E75 1_C ...
Page 126: ...490E75 1_C 126 ...
