Otto Bock 490E75 1 C Series, Instructions For Use Manual

Page: 62 / 128

7.7.8.2 R-Net control unit
INFORMATION
This function is currently not enabled.
For questions related to enabling it, please consult the qualified personnel that adapted the product or the manu­
facturer's service (see inside back cover or back page for addresses).
The power wheelchair control unit features an electronic drive-away lock. This function is activated/deactivated via
the control panel.
Activating the drive-away lock
1) Press and hold the [On/off] button while the control device is turned on.
2) Release the [On/off] button after a beep sounds (approx. 1 second).
3) Push the joystick all the way forward until a beep sounds.
4) Push the joystick all the way back until a beep sounds.
→ A long beep confirms that the drive-away lock was activated.
→
The control device turns itself off.
→ The key symbol on the LCD screen indicates that the drive-away lock is activated:
Display Information
Drive-away lock
Deactivating the drive-away lock
1) Push the [On/Off] button on the control panel.
→
The control device is turned on. The LCD screen indicates that the drive-away lock is activated.
2) Push the joystick all the way forward until a beep sounds.
3) Push the joystick all the way back until a beep sounds.
4) Release the joystick.
→ A long beep confirms that the driving function is enabled.
→
The battery indicator and speed level are shown on the LCD screen.
→ The drive-away lock is deactivated and driving is enabled.
Activating the drive-away lock
1) Press and hold the [On/off] button while the control device is turned on.
2) Release the [On/off] button after a beep sounds (approx. 1 second).
3) Push the joystick all the way forward until a beep sounds.
4) Push the joystick all the way back until a beep sounds.
→ A long beep confirms that the drive-away lock was activated.
→
The control device turns itself off.
→ A sequential indicator on the [Selected speed level] LED display indicates that the drive-away lock is active:
Display Information
Sequential indicator on the "Speed levels"
LED display Drive-away lock
Deactivating the drive-away lock
1) Push the [On/off] button on the control panel.
→ The control device is turned on. The [Selected speed level] LED display is in sequential indicator mode.
The [Charge level] LED display is off.
2) Push the joystick all the way forward until a beep sounds.
3) Push the joystick all the way back until a beep sounds.
4) Release the joystick.
→ A long beep confirms that the driving function is enabled.
→ The [Selected speed level] LED display and the [Charge level] LED display are lit up.
→
The drive-away lock is deactivated and driving is enabled.
62
Use
490E75=1_C