P
RODUCT
C
ONFIGURATION
P
RODUCT
S
PECIFICATION
AND
C
ONFIGURATION
C
HAPTER
2
22
2.2.3
Accessory (not supplied)
This section explains the accessories to be prepared by the customer before operating the welding power source.
Prepare the following:
•
Gas regulator
For the gas regulator, make sure to use a device for compressed gas cylinder that conforms to the specific application
of the shield gas.
•
Shield gas
Use a shield gas suitable to the welding method.
•
Cooling water circulation device
In using the water-cooled welding torch, prepare a cooling water circulation device.
•
Welding torch (for TIG welding)
For TIG welding, prepare a torch for TIG welding as well as a gas hose.
•
Welding electrode holder (for DC STICK welding)
For DC STICK welding, prepare a welding electrode holder and a welding electrode.
WB-P402L: Use a cable connector for connection (Specification: DIX SK 50/Part No.: 4734-016) to the welding power
source.
WB-P502L: Use a crimp-style terminal for connection (Specification: R80-10/Part No.: 100-1298) to the welding power
source.
2.2.4
Optional accessories
This section explains the optional accessories used with the welding power source.
2.2.4.1
Remote control, voltage detection cable and other optional items
Following items are optionally available including remote control and voltage detection cable.
Name
Remarks
CO
2
-
gas
Carbon dioxide (CO
2
) 100 %
MAG gas
Argon (Ar) 80 % + Carbon dioxide (CO
2
) 20 %
MIG gas (stainless)
Argon (Ar) 98 % + Oxygen (O
2
) 2 %
MIG gas (aluminum/aluminum-bronze/silicon-bronze)
Argon (Ar) 100 %
Product name
Part No. (Model)
Remarks
Analog remote control
K5804S00
Includes 10 ft (3 m) cable
Conversion cable
K8116E00
Used when the conventional analog remote control (K5416Z00) is used
Digital remote control
E-2454
CAN communication cable and BKCAN conversion connector are separately
required.
CAN communication cable
BKCAN-0405
16 ft (5 m)
BKCAN-0410
33 ft (10 m)
BKCAN conversion connector
K5810B00
Welding interface unit
IFR-101WB
For robots by other manufacturer
CAN communication module
K5422C00
For using both the digital remote control and servo feeder for CAN.
PC welding monitor
K-7496
Data storage
E-2648
Voltage detection cable
K5416N00
Base metal side, 33 ft (10 m)
Voltage detection cable
K5416G00
Base metal side, 99 ft (30 m)
TIG valve kit
K8197A00
Fieldbus connection tool
IFR-800
(*1)
Analog foot control
KM3022
*1: IFR-800EI (EtherNet/IP connection type)
IFR-800PB (PROFIBUS connection type)
IFR-800DN (DeviceNet connection type)
IFR-800PN (PROFINET connection type)
