125
Chapter 7
Administrator F
unctions
D
ATA
B
ACKUP
(U
TILIZATION OF DATA
)
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
7.3.1
Setting of welding conditions/internal functions
The following contents can be stored in the "DAIHEN_OTC_WELDING_PRAMETER.CSV" file.
•
All the welding condition data recorded in memory
•
The internal function values at the time of data backup
The current welding conditions set with the operation panel will not be saved. (If necessary, record them in memory
beforehand.)
The welding condition data recorded in the memory will be output in the way that the JOB Nos. (registration Nos.) are
displayed in a vertical line and the parameter values in a horizontally line.
Item
Description
Unit Item
Description
Unit
job num
JOB No.
-255 to -155
1 to 100
cre feed
Crater feed speed
3.9 (IPM)
[0.1 (m/min)]
spot tim
Arc Spot time
0.1 (s)
ant tim adj
Anti-stic time adjustment
0.01 (s)
prf tim
Pre-flow time
0.1 (s)
ant vset adj
Anti-stic voltage
adjustment
0.1 (V)
pre iset
Initial current
1 (A)
sldwn adj
Slowdown adjustment
3.9 (IPM)
[0.1 (m/min)]
pre vset
Initial voltage
0.1 (V)
up slp tim
Up-slope
time
0.1 (s)
pre uni vset
Initial voltage (synergic)
1 ( )
dwn slp tim
Down-slope
time
0.1 (s)
wld iset
Welding current
1 (A)
pre tim
Initial time
0.1 (s)
wld vset
Welding voltage
0.1 (V)
cre tim
Crater time
0.1 (s)
wld uni vset
Welding voltage (synergic)
1 ( )
KubireAutoAdj
Automatic correction of
[s ueeze]
0/1(OFF/ON)
cre iset
Crater current
1 (A)
KubireAutoSave
Saving [s ueeze]
−
cre vset
Crater voltage
0.1 (V)
KubireP1P
Spatter control P1P
1( )
cre uni vset
Crater voltage
(synergic)
1 ( )
KubireP2P
Spatter control P2P
1( )
aff tim
Post-flow time
0.1 (s)
PerIset
Current value change
setting
0/1(OFF/ON)
arc char
Arc characteristics
1 ( )
PreIsetPer
Current value setting (initial
conditions)
1(%)
wave fr
Wave fre uency
0.1 (Hz)
CreIsetPer
Current setting (crater fill)
1(%)
arc char2
Arc characteristics
(reserved)
−
TsCric Iset
Torch switch
current adjustment
0/1(OFF/ON)
pre sens slp
[S ueeze] detection
sensitivity (reserved)
−
CriIsetStep1
Single clic adjustment
value
1 (A)
pre sens cnst
−
−
CriIsetStep2
Double clic
adjustment value
1 (A)
pls p i adj
Pulse pea current
fine adjustment
1 (A)
WModeTblNo
Welding table No.
（
*3
）
pls p t adj
Pulse pea time
fine adjustment
0.1 (ms)
wld uni fset
Arc length adjustment value
(when MS-MIG is selected)
0.1( )
pls bsi adj
Base current fine
adjustment
1 (A)
pre uni fset
Initial arc length
adjustment value
(when MS-MIG is selected)
0.1( )
"-" is shown for unused condition num
b
ers.
P
arameter of condition
N
o.1
P
arameter value
J
O
B
N
o.
