2 General Description
2-18
Service Manual – Osmetech OPTI™ Analyzer
Run Menu – Osmetech OPTI 1
SRC
Controls
SRC Measurement
Op ID: XXXX
RUN: SRC Controls
Data Time/Date Setup Diag
Swipe SRC Barcode
Insert SRC
Printed Results
Data
Data: Patient
SRC Controls Export
Time/Date
Time: 08:51:23
Date: 15-Feb-95
Setup
Please enter PW2
Password <ENTER>
Diag
To Data Menu
To Setup Menu
SRC Inserted
SRC Measurement 160
Optics Module Warmup
SRC Measurement 73
Reading SRC Signals
pH PCO2 PO2 Test
7.354 43.6 103.4 Pass
Please Open Cover
Please Remove SRC
To Diag Menu
Insert SRC
Printed Results
Run Controls
Op ID: XXXXXXXXXXX
Run Controls
Level: 1 2 3
Run Controls Level 1
Lot #: XXXX <ENTER>
Esc
Run Controls
Op ID: XXXXXXXX
Run Controls
Level: 1 2 3
Run Controls Level 1
Lot #:xxxxxx <ENTER>
Swipe Cassette Barcode
to run Control
Insert Cassette
Calibrating 99
Please Remove Cassette
Cassette Inserted
Please Wait
Checking Cassette
Accept Results <ENTER>
Reject / Edit <ESC>
Edit <ESC>
Reject Results <ENTER>
Run OPTI-trol Controls
Op ID: XXXXXXXX
DATA - Controls
StatsReprt: All L1 L2 L3
Run OPTI-trol Level 1
Lot #:xxxxxx <ENTER>
Swipe Cassette Barcode
to run Control
Insert Cassette
pH PCO2 PO2 Test
7.238 45.3 101.8 Pass
Accept Results <ENTER>
Reject / Edit <ESC>
Cassette Inserted
Calibration OK XXX
Place Control Now<Enter>
Please Remove Cassette
Edit <ESC>
Reject Results <ENTER>
Calibration OK
Place Control Now<Enter>
Measuring Control 90
Aspirating Control
pH PCO2 PO2 Test
7.238 45.3 101.8 Pass
Place Sample <ENTER>
or End <ESC>
Measuring Sample
Input Pat. Data <ENTER>
Aspirating Sample
Input Pat. Data <ENTER>
pH PCO2 PO2 O2Sat
7.388 44.6 159.7 99.4
if OPTI-trol is selected
<ENTER>
<ESC>
Fig. 2-6: Run Menu
