SECTION 5 - ACCESSORIES
5-8
31215918
Safety Precautions
THIS ACCESSORY AFFECTS OVERALL PLATFORM CAPACITY. REFER TO CAPACITY
DECALS AND ADJUST ACCORDINGLY. WEIGHT IN RACKS PLUS WEIGHT IN PLATFORM
MUST NOT EXCEED RATED CAPACITY.
RETRACT PLATFORM EXTENSION BEFORE ATTACHING PIPE RACKS AND LOADING
MATERIAL.
MAXIMUM WEIGHT IN RACKS IS 45 KG (100 LB) EVENLY DISTRIBUTED BETWEEN
RACKS. MAX LENGTH IS 6 M (20 FT). MAX CIRCUMFERENCE OF MATERIAL IS 180 MM
PER PIPE.
• Do not exit platform over rails or stand on rails.
• Do not drive the machine without material secured.
• Use this accessory on approved models only.
• Return racks to the stowed position when not in use.
Preparation and Inspection
• Ensure both racks are mounted and securely fastened to
inside of platform rails.
• Check for missing or damaged components. Replace if
necessary.
Operation
1.
To prepare racks for loading, remove locking pins, rotate
each rack 90 degrees from stowed to working position, then
secure with locking pins.
2.
Place material onto racks with weight evenly distributed
between both racks. Do not exceed the rated capacity stated
on the decal.
3.
Route the tie-down straps at each end across loaded
material and tighten.
4.
To remove material, loosen and remove tie-down straps,
then carefully remove material from racks.
NOTE:
Reinstall tie-down straps across any remaining material before
continuing machine operations.
5.
When not in use, remove locking pins, rotate racks 90
degrees to the stowed position, then secure locking pins.
To
order
go
to
Discount-Equipment.com
